COMMAND LOST WHEN ROUTE IS PRINTED

[REL4]

HI,I HAVE SOME PROBLEMS WHITH ROUTES PRINT .
WHEN I GET THE ROCAP, FOR EXAMPLE, DIR=ALL; IT STOPS AT THE MEDLE OF PRINT AND IT RESPONSE WHITH TEXT "COMAND LOST";
I THINK THE PROBLEM WAS WHEN WE ERASE ONE LIM IN THE SISTEM WHITHOUT ERASING ROUTE DATA.
NOW THERE IS NO ALARMS IN LOG BUT PROBLEM STILL EXISTS, ANY IDEA TO SOLUTINATE THIS PROBLEM?
THANKS ALL. AAAAH , ITS BC10...

 

[rfpui]

Hi
you send an answer for your problem
It is a consequence of erase LIM
Look to thread806-834623
And Thread806-821200

Now solution is to load system from INL and data

 

[REL4]

do you mean...
make a new lim disp. whith all the lims again and charge all data in them?

 

[whosrdaddy]

scib,
contact your local e/// provider they can solve this type of data corruption without the need to remake a complete system...

--------------------------------------
What You See Is What You Get

 

[rfpui]

Hi all
whosrdaddy have right. It is possible to reappear system by e/// engineers
But who now what else is faulty
I have contacts with an e /// engineers and they says it is better to load new system

Scib
How big is your system (how many LIMs)

 

[REL4]

hi, there are four lims in system, bc10 paq A , "Ro" are the only commands that fails...