Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Comdial international calling
- Thread starter rkochis
- Start date
Just a thought,it is more then likely your cleaning crew that is doing it. Do you know how to program? there are 4 programs to get it set up so that all the stations have to force a code before the call can be made.
- Thread starter
- #4
All, it may be easier to have your LD provider set up codes for your users then you can get a record of who called what.
If you can give me a little more info I'm sure i can come up with a solution.
You can restrict certain digits that are the leading digits dialed when attempting to dial an international call. As far as I know, the USA is the only country that we need to dial 1 for calls here. All other countries, I believe, have a 2 digit number as their leading digits. You can set up a table to deny calls to any numbers you list and assign them to the lines & stations. Although, telprog has a very good idea too!! I would probably hook a printer to the SMDR port and pull reports to find out what line(s) is/are being used as well as the number being dialed, and from what extensions. I would then have a talk with the culprit!!!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
