I wanted to check and see if and would know the answer to a problem i am having. I am using cm6.1.2 with 1760 as a h323 gateway. I am connecting to comcast digital voice service to my fxo card. I am finding that i can only get 1 out of 3 calls in from the outside (FXO card LED only lites on connected call), and when the call does connect i am not disconnecting when the other side hangs up. The other issue i am finding is that i cannot place any calls out. I tried mgcp before but the analog ports would never register so i went to h323.
I connected my test set to the line and able to go on-hook but when off-hook i do hear static and other noise and notice that it takes a few seconds to disconnect. I wanted to see if anyone else has either tried to use comcast digital voice or other providers broadband voice and run into any issue's or have advice on what i should try to set my FXO port settings too.
Thanks.
I connected my test set to the line and able to go on-hook but when off-hook i do hear static and other noise and notice that it takes a few seconds to disconnect. I wanted to see if anyone else has either tried to use comcast digital voice or other providers broadband voice and run into any issue's or have advice on what i should try to set my FXO port settings too.
Thanks.