Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Combining KX-TES824 and KX-TA616

Status
Not open for further replies.

Engr_one

IS-IT--Management
Sep 29, 2022
2
NG
I have both KX-TES824 and KX-TA616 at a location. How should connect so that extensions on KX-TES824 can call extensions on KX-TA616 and the other way round.
 
You will need some free extensions & some free CO Lines on both systems.
An extension from KX-TES824 plugs into CO Line port of KX-TA616 as a trunk and vice versa.
Creat a CO Line group for the respective extensions plugged in as trunks on either systems and create a Leading number for the group or use trunk group access and you are good to go ...

Wanet Telecoms Limited
 
Many thanks omonat. I'm new with panasonic.
How do I configure extension as a trunk and creat a group with maintenance console?
 
Under CO detail you can create CO Group (Trunk group)
and
Take care not to plug an extension into an extension port!!!

Wanet Telecoms Limited
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top