Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Color code 11C

Status
Not open for further replies.

Qamar177

Technical User
May 28, 2019
64
PK
What is standard color coding for meridian SL1 XUT card ?
 
What is the part number? QPCnn or QPCnnn typicly for the SL1 switches, or NTnxnn (ie NT8D14) for the Meridian 1 switches.

Typical layout for most single pair PE cards (Analog Line, Digital Line, CO Trunk, etc)

wbl/bl unit 0
wor/or unit 1
wgr/gr unit 2

etc, etc

rgr/gr unit 7 (end of 8 port cards)
ybl/bl unit 15 (end of 16 port cards)

All additional pairs are ground, unsused, data, etc see the appropriate NTP.

Going off memory, as I last worked on an full SL1 in the early 90s, the rest were SL1 cabs left over after upgrading to an M1 Opt 61c.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top