Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Codespear and Call Manager 4.0

Status
Not open for further replies.

myarberry

Technical User
Apr 6, 2006
41
US
We are attempting to interface a software called Codespear which does automatic notification to pagers,Phones.The system uses a gateway built in CCM and when we make internal calls from the software you can see the call come in and then when you pick up call there should be an automated message. When you pick up call there is no voice at all, but when Unity picks up the call, the message is then heard in mailbox. Any ideas on what could be causing this ptoblem? any help would be appreciated.
Thanks Mike Mayberry.
 
you can use Unity to notify pagers and other phones.

Hope this helps.

Please remember to rate helpful posts........
 
Yes this software was actully bought with a grant for Bio Terrorism and it is the same software for all hospitals in this area that is why we are using it.But thanks for the suggestion.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top