Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CO line failure

Status
Not open for further replies.

CHRIN1

MIS
Feb 12, 2004
24
KH
Dear all,

I am the new user on PANASONIC TD1232. these 3 days i met some problem with my CO line the red light on operator console was qucikly flashing with the remak CO2= CO 02 and
ringing every 5 Mn.
Can anyone help me to solve this matter because what i have did right now is removed the co line from PBX.

Thanks for your help
chrin
 
Dear Chrin

I think you have problem in your external line because if any one tray to connect any thing before PBX or mess with line it will planking and ring on your operator.

Regards
Rami
 
test your line directly with a slt
then move a known good line to the co port a fault and see if you still have a fault

if not then fault with line

if so then fault with card


peter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top