CNLIP

[Monrovia]

hi all

one small doubt it is.
using this command CNLIP:LIM=1; i was getting all the data regarding the boards active, inactive in that lim like

   CNLIP:LIM=1;

   LIM CONFIGURATION
   LIM NUMBER 1  
     LIM CONTROL  LIM CONTROL   NUMBER OF  SERVICE
     SYSTEM SIDE  SYSTEM STATE  PCM-LINKS  STATE LIM
         A        EXECUTING        0       ACTIVE
         B        NOT EQUIPPED
     MEMORY   MEMORY   MEMORY SPARE
     VOLUME   SPARE    AFTER PACKING
     65535 KB 12248 KB 12248 KB 
     BUAR1   3810 KB      BUAR2   2989 KB  

                 NUMBER OF
       BPOS      BOARDID  INDIVIDUALS  SERVICE STATE
       001-0-00     57         32      ACTIVE
       001-0-10    102         32      ACTIVE
       001-0-20     77         16      ACTIVE
       001-0-22     77         16      ACTIVE
       001-0-30     77         16      ACTIVE
       001-0-32     87         16      ACTIVE
       001-0-40     87         16      ACTIVE
       001-0-42     87         16      ACTIVE
       001-0-50     87         16      ACTIVE
       001-0-52     87         16      ACTIVE
       001-0-60    106         16      ACTIVE
       001-0-62                        NOT EQUIPPED
       001-0-63     76          8      ACTIVE
       001-0-70     42         32      ACTIVE
       001-1-00     57         32      ACTIVE
       001-1-10    102         32      ACTIVE
       001-1-20     77         16      ACTIVE
       001-1-22     87         16      ACTIVE
       001-1-30     57         32      ACTIVE
       001-1-40    108         16      ACTIVE
       001-1-42                        NOT EQUIPPED
       001-1-43                        NOT EQUIPPED
       001-1-50     27         32      ACTIVE
       001-1-60    106         16      ACTIVE
       001-1-62     77         16      ACTIVE
       001-1-70     57         32      ACTIVE

but now i am only getting a small description like

<CNLIP:LIM=1;

   LIM CONFIGURATION
   LIM NUMBER 1  
     LIM CONTROL  LIM CONTROL   NUMBER OF  SERVICE
     SYSTEM SIDE  SYSTEM STATE  PCM-LINKS  STATE LIM
         A        EXECUTING        0       ACTIVE
         B        NOT EQUIPPED
     MEMORY   MEMORY   MEMORY SPARE
     VOLUME   SPARE    AFTER PACKING
     65535 KB 12248 KB 12248 KB 
     BUAR1   3810 KB      BUAR2   2989 KB

why like this?

now what i am doing is using the command CNBIP:LIM=1; i am finding out. to get back the same details using cnlip, what is wrong with the system?

 

[parnum]

CNLIP:LIM=1,DEV=YES;

 

[Monrovia]

oops!!!!

my mistake. i fogot it