CNI Meridian 11C

[vasquezwilmer]

Dear All,

I just confugured a DID services between Meridian 11c and CiscoAS5300 platform. Call are coming from the PSTN using SS7 signaling. The Main Swtch pass those calls to one AS5300 Cisco GW via ISDN and those calls are sending to another Cisco AS5300 connected to Meridian 11C over R2 Signaling.

Calls are working fine, the problem is with the ANI. Here are go the trace for:

.trac 0 95 17

ACTIVE TN DTI 004 17
ORIG DTI 004 17 DID RMBR 95 17 CALL TYPE VCE
SICA 2
SENT CONN 0101 RECV CONN 0001
PDCA 3 PAD 0 0 PCML MU A
TERM NONE
TTR 000 0 00 05
DIAL 0 29 TTR 59
RCVR 61 SET 29

DIAL DN NONE
MAIN_PM READY AUX_PM AUTRCODE
TALKSLOT NONE
EES_DATA:
NONE
QUEU DIAL
CALL ID 0 516


We have other services connect directly from the PSTN to Merdiian via CPE. Follow the trace call:

.trac 0 0 5

ACTIVE TN DTI 003 05
ORIG DTI 003 05 DID RMBR 0 5 CALL TYPE VCE CNI 2129863092
SICA 2
SENT CONN 0101 RECV CONN 0001
PDCA 3 PAD 4 4 PCML MU A
TERM 009 08 TIE RMBR 88 8
DIAL DN 718860003585006294835
MAIN_PM ESTD
TALKSLOT ORIG 14 TERM 10
EES_DATA:
NONE
QUEU NONE
CALL ID 0 757


---- ISDN PRA CALL (TERM) ----
CALL REF # = 631
BEARER CAP = VOICE
HLC =
CALL STATE = 10 ACTIVE
CALLING NO = 2129863092 NUM_PLAN:UNKNOWN TON:UNKNOWN ESN:UNKNOWN
CALLED NO = 60003585006294835 NUM_PLAN:E164 TON:UNKNOWN ESN:UNKNOWN



THE BIG DIFFERENTE IS THAT OVER R2, CNI ITEMS DOES NOT APPEAR. PLEASE I WOULD LIKE TO KNOW HOW CAN I GET THIS PARAMETER IN MY MERIDIAN 11C

Thnks in advance

WV

 

[vasquezwilmer]

Please let me know how to set it up.