Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CMS Data Feed

Status
Not open for further replies.

heatmap

MIS
Jan 29, 2013
13
US
Our workforce management is implementing username and password for the CMS data feed. Where do I enter this information?
 

It depends on what you're using for workforce management.

The config file is in a subdirectory under: /export/home/pserv

For IEX in our system it's /export/home/pserv/iex6/iex.conf

For eWFM at my previous company it was /export/home/pserv/tcs5/ there's a config file in this directory as well, can't remember the name might be tcs.config

You need to edit this file and put in the user name, password and the host name (name of the wfm server).

You also need to edit the hosts file in the /etc directory and add the server IP address and name to use for the wfm server.


- Stinney

I love learning and passing on knowledge. "Because knowing is half the battle".... GI JOOOOOE!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top