Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CMS backup history

Status
Not open for further replies.

bankingguy

IS-IT--Management
Nov 26, 2017
129
SG
is there a way in CMS to check its history about its backup if its successful or not? If yes, possible to guide me?
 
You can run CMS Supervisor and go to Tools | Maintenance and select the Reports Tab, then select the Error Log Report.

In the report you will have "Error Code" 1711 for Backup information.

1711 6/22/2020 5:06 AM 2 1 INFO BACKUP INFO: The backup has completed successfully. Please label the volume [filename]
1711 6/22/2020 5:05 AM 1 1 INFO BACKUP INFO: Based on 40GB tape size, it is estimated you need 1 ( 0.03 ) volumes.


Backup history is also located in /cms/install/logdir/backup.log

This will give you the last 15 entries in the log:

tail -15 /cms/install/logdir/backup.log


You should get an output like this:

===== Begin backup Mon Jun 1 11:58:48 EDT 2020

Converter started Mon Jun 1 11:58:48 EDT 2020
Converter completed successfully Mon Jun 1 11:58:48 EDT 2020

Testing tape on /dev/rmt/0...

Tape test on /dev/rmt/0 is okay...

11721700 blocks

===== Finished backup Mon Jun 1 12:02:45 EDT 2020






- Stinney

“The man who asks a question is a fool for a minute, the man who does not ask is a fool for life.” - Confucius
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top