Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CMS Access

Status
Not open for further replies.

mrjedi

Vendor
Dec 5, 2003
733
NG
I am really getting frustrated about accessing CMS remotely. My Laptop can't access it, but with the same config, I can access it from a older version of DELL. Is there a setting I am missing ?
 
How are you trying to access it? Dial in? TCP/IP? If via TCP/IP is there any firewall in teh way?
 
Is the modem in your laptop a new 56K (V90) type? If so have you considered setting the speed lower?
Below is an extract from a manual.

The table below shows the possible values:
“AT-V90=X” Downstream Rate
0 V.90 disabled
1 Auto Rate (default)
2 28000 kbit/s
3 29333 kbit/s
4 30666 kbit/s
5 32000 kbit/s
6 33333 kbit/s
7 34666 kbit/s
8 36000 kbit/s
9 37333 kbit/s
10 38666 kbit/s
11 40000 kbit/s
12 41333 kbit/s
13 42666 kbit/s
14 44000 kbit/s
15 45333 kbit/s
16 46666 kbit/s
17 48000 kbit/s
18 49333 kbit/s
19 50666 kbit/s
20 52000 kbit/s
21 53333 kbit/s

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top