CMM Voicemailproblem S8300C

[knoester]

Hello all,
After installing the language pack "dutch.rpm" the messaging fails to start.Only after reinstalling the system it will come up again.
We are running CM 5.2 on a G450 Gateway.
Anyone had this problem before?
after the command "start messaging" the following was seen:

Beginning Database Integrity Check,Please Wait...
19 18 17 16 15 14 13 12 11 Datbase permissions are incorrect for /vm/audix/sd/mail/dr
Poet database check FAILED
POET database integity check failed - database not writeable

Thanks,

 

[No1cookie]

Hi Knoester,

I'm getting same error on the same cm 5.2 on a g430 ,
sorry i cannot help but i'm glad i'm not the only one tearing my hair out.

 

[knoester]

Ok thanks for your reply No1cookie.Now i know it is a avaya issue.

 

[Spudmoooo]

Guy's - What was the fix for this ?
I'm in the same boat !

 

[Spudmoooo]

Guy',

The fix is to load CMM patch A082rf+a & C1113rf+a

Cheers

 

[knoester]

Hi guys,(and dolls)
problem has been fixed.
Hostname of audix may not be localhost.
It must have the same name as in the CM audix admin.

 

[fbs003]

Guys,
* possible fix see 2nd paragraph.

Same problem on a G350 / S8300 with British.rpm and can't find those patches. Audixcd 5.2-29.0
Uninstalled British language file, no change.
System Status and Alarm Summary says "messaging offline", tried stopping and starting but still get "Poet database check FAILED" (knew I didn't like poetry at school for a reason ;-).
Voice Channel Monitor shows on hook.
Can't get into system administration to change hostname as it says "messaging software not running, please start messaging".
Tried a reboot of the S8300.
Announcement set page now shows nothing, not even us-eng, us-tdd. List Messaging Software shows both us-eng and us-tdd
Tried disabling and enabling messaging on Server Maintenance.

* possible fix
Tried stopping messaging, installing us-eng and us-tdd again.... good news, they're now in Announcement Sets.
Well F*&k me, I can now get into System Administration again and System Status says "messaging in service" and that makes me happy, hopefully I'm back in business. I'll do a backup and try again.

Hope this helps someone else, will post back if it's f&*ked.