CME: Outgoing Calling Number

[SalvoPhl]

Hi All,

HI would to get the CME to send the Telco the complete DID number 0113438020 , instead of just the 4 digit extension 8020 (indicated below in red), it was sending it initially, can’t remember what I changed ?

----------


Nov 25 07:43:03.034: ISDN Se0/2/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 8020
Nov 25 07:43:03.038: ISDN Se0/2/0:15 Q931: Sending SETUP callref = 0x04B0 callID = 0x8431 switch = primary-net5 interface = User
Nov 25 07:43:03.038: ISDN Se0/2/0:15 Q931: TX -> SETUP pd = 8 callref = 0x04B0
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0180, '8020'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '0828099900'
Plan:ISDN, Type:Unknown
Nov 25 07:43:03.078: ISDN Se0/2/0:15 Q931: RX <- SETUP_ACK pd = 8 callref = 0x84B0
Channel ID i = 0xA9839F
Exclusive, Channel 31
Nov 25 07:43:04.482: ISDN Se0/2/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x84B0
Cause i = 0x8491 - User busy
Progress Ind i = 0x8288 - In-band info or appropriate now available
Nov 25 07:43:04.482: ISDN Se0/2/0:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0x8431
Nov 25 07:43:09.914: ISDN Se0/2/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x04B0
Nov 25 07:43:09.930: ISDN Se0/2/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x84B0

 

[loucanick]

Use a voice translation profile on the outgoing dial peer to prepend the desired numbers... ??

 

[CCIETech]

Hi
If you need to send your DID (full digit)from pstn to GW, you have many choice:

first: translation rule
#voice translation-rule 1
#rule 1 /^\(8020)/ /011343\1/

#voice translation-profile 11digits
#translate called 1
*************Now apply this translation profile for incoming call dial-peer:

#dial-peer voice 2 pots
#incoming-called-number .
#direct-inward-dial
#translation-profile incoming 11digits

second choice:
Use Exp-num 8020 0113438020