Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CME 4 digit dial 1
- Thread starter velen0
- Start date
-
1
- Thread starter
- #2
hello i found the solution,the two cme must be able to communicate in order to be able to do the 4 digit dial.
voice service voip
allow-connections h323 to h323
fax protocol none
h323
h225 timeout setup 1
call preserve
modem passthrough nse codec g711ulaw
!
dial-peer voice 4101 voip
destination-pattern 41..
progress_ind setup enable 3
voice-class h323 1010
session target ipv4:REMOTE_SITE_IP
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
voice service voip
allow-connections h323 to h323
fax protocol none
h323
h225 timeout setup 1
call preserve
modem passthrough nse codec g711ulaw
!
dial-peer voice 4101 voip
destination-pattern 41..
progress_ind setup enable 3
voice-class h323 1010
session target ipv4:REMOTE_SITE_IP
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
- Status