Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CM5 Upgrade Question
- Thread starter Spudmoooo
- Start date
No, you need to license the new system, you will have the opportunity in RFA to specify the new IPSI serial #'s, or if you are moving to a G450, you can specify the G450 Serial number.
If you are planning on moving the IPSI's from one PN to the other, then use a different IPSI (such as a standby IPSI) to license the new switch, and move that one over with the new license. The old switch can run without the standby IPSI.
The old switch will continue to run, with the old IPSI's until you shut it down.
Mitch
AVAYA Certified Expert
If you are planning on moving the IPSI's from one PN to the other, then use a different IPSI (such as a standby IPSI) to license the new switch, and move that one over with the new license. The old switch can run without the standby IPSI.
The old switch will continue to run, with the old IPSI's until you shut it down.
Mitch
AVAYA Certified Expert
- Status
Similar threads
- Locked
- Question