CM3 + Cisco IP Phone 7912G

[DJPlaZma]

I was just given a Cisco IP 7912G and asked if it would work on our system.

Can someone please outline what RTUs, Capacity and Servers I may need in order to utilize this phone on our network? I've never worked on anything other than Avaya, so I've never had the "joy" of working with a third-party phone on our system. I can provide whatever reports are necessary. A few particulars below.

CM3.0
Already using IP SoftPhone
System capacity of 565 IP Stations.
No SIP server.
No TFTP server.

Again, many thanks in advance for any help.

-DJ PlaZma
Single-Handedly Keeping the 80s Alive.

http://www.PlaZmaRadio.com

 

[98Converter]

Different model phone - but could supply some principles...

http://www.avaya.com/master-usa/en-us/resource/assets/applicationnotes/cisco7960sip.pdf

Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[DJPlaZma]

Thanks! It'll give me somewhere to start. Of course, I could call Cisco...but that'd be too easy.

Besides, I've noticed that, more often than not, the answers you get on here are better and more accurate...largely because people on here are smart enough to cut through the crap and get down to the "here's what you have to do".

-DJ PlaZma
Single-Handedly Keeping the 80s Alive!

http://www.PlaZmaRadio.com

http://plazmaradio.serveroom.us:9652/listen.pls