CM + VG200

[Guest_imported]

Greetings all,

I'm relatively new to the whole call manager issue, but I've somehow managed to configure our call manager for both internal and external calls through the PSTN.

Now, we're trying to implement a VG200 to act as a secondary call manager.

Although, we've come so far, my basics are still unclear. Therefore, I request any one who has the experience, guide me in understanding how when a call comes in from the internal with a the number 0001, gets routed to a VG200 FXO port. And once it comes there, I would like to re-route it back to another extension, for example, 0002.

I've read the mgcp configuration guide from cisco, but it assumes that you have 2 FXOs and 2 FXSs. All I have are 4 FXOs. What does that mean? Can I still plug in 4 PSTN lines into the VG200 and use them ? If so, how ?

I appreciate any comments and answers. Please do find the time to write in any of your ideas, because I'm running out of time here.

Thank you, all.

 

[BuckWeet]

Why would you want to have the VG200 act as a Callmanager? Second of all, that is not possible with the VG200.. The VG200 is strictly made to be a MGCP or H323 gateway. It has no SRST capabilities, limited call control capabilities.

Let me ask you what you're saying, you have an internal caller, which you want to hit the VG200 to get routed back out to another internal extension? I again ask, why? Just make the extensions in the callmanager. Are you talking about having a Cisco Phone, and then calling an Analog phone (which would require FXS ports) ??


Need more info... Once we get that, we'll all be more than glad to help...

Let us know.

BuckWeet