Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM/SIP trunk signaling with provider

Status
Not open for further replies.
malek taha

malek taha

Vendor
Dec 7, 2022
1
JO
Hi all

I'm trying to create SIP trunk with Ooredo,

I have GW in Qatar and Main CM in JORDAN now we connect the SIP from Ooredo to FW and the calls reached to FW but I did not see anything on the CM,also when I dial out same.

I think nat from FW is correct but the signaling and the trunk on CM have issue is there any steps I can follow it?
 
Status
Not open for further replies.

Similar threads

Stinney
  • Locked
  • Question
Can't set SIP signaling group to not add '+' 1
Replies
2
Views
5K
Instructor of Avaya
Instructor of Avaya
Craft01
  • Question
CM Duplex with ESS
Replies
6
Views
364
mattKnight
mattKnight
hebegb41
  • Locked
  • Question
Avaya SM/CM 8.1 J139 SIP phones and "bridged Appearances"
Replies
4
Views
414
hebegb41
hebegb41
TN94z
  • Locked
  • Question
Avaya CM 10.0 SIP Caller ID blocking 1
Replies
3
Views
890
TN94z
TN94z
snajo
  • Locked
  • Question
SIP Trunk on CM7... Can it be done?
Replies
5
Views
267
snajo
snajo

Part and Inventory Search

Sponsor

Back
Top