I am trying to connect CME v8.1 to the CM using SIP. The systems are in different states and we are connected with the MPLS PPP link.
Here is what I have on the CME:
dial-peer voice 2003 voip
description THQ
destination-pattern 10[1-9]..
session protocol sipv2
session target ipv4:10.101.2.97
dtmf-relay sip-notify
codec g711ulaw
no vad
The CM administrator says my configuration matches his config on the CM.
He can call my 5-digit extensions but I cannot call any extensions on his site. When I call his 5-digit extension I get "Unknown Number" message on my phone and short busy signal.
I've tried to use different codec and dtmf-relay settings to no avail.
Someone please help me figure out what I am missing.
Thank you.
Here is what I have on the CME:
dial-peer voice 2003 voip
description THQ
destination-pattern 10[1-9]..
session protocol sipv2
session target ipv4:10.101.2.97
dtmf-relay sip-notify
codec g711ulaw
no vad
The CM administrator says my configuration matches his config on the CM.
He can call my 5-digit extensions but I cannot call any extensions on his site. When I call his 5-digit extension I get "Unknown Number" message on my phone and short busy signal.
I've tried to use different codec and dtmf-relay settings to no avail.
Someone please help me figure out what I am missing.
Thank you.