Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CLS PCAM
- Thread starter ahannigan
- Start date
EddieDuece
IS-IT--Management
Found something, not sure if it'll help;
CLS T87A
AST 00
IAPG 0
AACS YES
KEY 00 SCR 1234 0
and on PCA:
CLS T87D PCAM
KEY 00 SCR 1234 0
01 HOT P 4 DN 5555
other possible cause:
1-On the Call Server: Is the ELAN “ACTIVE”?
2-SIP CTI service not enabled on the Sig. Server.
3- SECU should be set to YES in the VAS configuration, otherwise TN cannot be acquired.
4-Make sure that you do have all required licenses and packages.
AST, TR87, PCA (for Sip Gateway Feature) licenses and pkg 408 (MS_CONV)
Make sure the set is de-acquired before attempting to make changes.
CLS T87A
AST 00
IAPG 0
AACS YES
KEY 00 SCR 1234 0
and on PCA:
CLS T87D PCAM
KEY 00 SCR 1234 0
01 HOT P 4 DN 5555
other possible cause:
1-On the Call Server: Is the ELAN “ACTIVE”?
2-SIP CTI service not enabled on the Sig. Server.
3- SECU should be set to YES in the VAS configuration, otherwise TN cannot be acquired.
4-Make sure that you do have all required licenses and packages.
AST, TR87, PCA (for Sip Gateway Feature) licenses and pkg 408 (MS_CONV)
Make sure the set is de-acquired before attempting to make changes.
- Status
Similar threads
- Locked
- Helpful tip