Closing problem

[dmrVA]

When I post from subledger, I always do it by modules. I posted Bankbook and Accts Receivable. No problem.s Then I posted Inventory. It just got stuck forever??? the screen would not even shrink.. Finally I closed it by hitting the X in the upper right.

My instructions had if this ever happened (has not) to copy from by backup the module TRXFIL.btr (ie. IMTRXFIL.btr), the GLTRXFIL.btr and the GLTRXHIS.btr then try again.
There is no IMTRXFIL. I looked for the BB and the AR and I do have a BBTRXFIL, but it was last updated at 5:30, not 8:30 when I ran the posting.

I ran the IM Distribution report and it is the same as it was before I started the posting.

Any thoughts??
Thanks
Donna

 

[dmrVA]

For reference...this was the fix per Macola support
delete GLPASFLS.btr and initilize REPTPASS.

This worked because my distribution file was still intact completely, it had not partially posted.