Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
closed ports
- Thread starter kurkulis
- Start date
For POP3, see fetchmail or getmail.
To use your ISP's SMTP server as a relay, use the relayhost directive in /etc/postfix/main.cf Example:
relayhost = smtp.myisp.com
Be advised that your ISP may require some form of authentication before you are allowed to use their smtp server to relay outgoing mail. If that is the case, you will need to figure out what they are using, then configure postfix to match it.
To use your ISP's SMTP server as a relay, use the relayhost directive in /etc/postfix/main.cf Example:
relayhost = smtp.myisp.com
Be advised that your ISP may require some form of authentication before you are allowed to use their smtp server to relay outgoing mail. If that is the case, you will need to figure out what they are using, then configure postfix to match it.
- Status