Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Clone issue

Status
Not open for further replies.

razvannw

Technical User
Jul 26, 2005
33
RO
Hello,
When I clone I discover that my tapes are not marked full, before NW request to mount another tape.
I expect that NW use new tape only when current tape is full.

For example:
The month clone, look like this:
Tape Status Pool
A000120 full Clone1
A000121 full Clone1
A000131 100GB Clone1
A000132 30GB Clone1

I want to specify that I use manual cloning, I use a script for that
 
Look at the tapes' contents with mminfo. There might be a residual (aborted) save set for one of these guys on the destination media.

This is not acceptable. As there can only be one reference for a save set on one tape, NW will request another media from this pool - no matter how full the first one is.
 
Maybe I wasn’t 100% clear , What I want to tell is that legato request another tape before the actual tape is marked full.
Instead I go to the bank with 3 tapes full, I must go with 2 full, and 2 tape 50%used.
I notice that for a while.

razvannw.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top