Clone a phone - meridian 2616 / OP61c

[Q6600]

Can someone baby me (or provide a link) on how to clone a phone on our option 61c running RLS 19.60? (I know its really old)

I know how to do some basic commands like renaming in LD 95 but I dont know how to create/clone phones.

Basically I want to clone the options/setup from an existing m2616 to a new TN/DN. (have a new phone waiting)

Thanks!

 

[morenot]

ld 11
REQ: CPY1
TYPE: 2616
CFTN: OLD TN
TN: NEW TN
DN: NEW DN

 

[PEMpal]

Should be a space between CPY and 1.

 

[tnphoneman]

LD 95

chg
name
5xxx
joe,smith

for name change.

DO NOT copy ACD sets.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[Q6600]

Fantastic, you guys are awesome.

On the LD25 for a name change, I have always used:

OUT
NAME
DN

then

NEW
NAME
DN

..to avoid extra chars when changing from a long name to a shorter one. Is CHG a shortcut for this?

Also - what happens if I overwrite a used TN/DN?
And one other thing, how can I print a list of used TN's/DN's?

Thanks again.

 

[SwitchWitch]

Prior to using the CPY 1 (have your TN and DN ready).

To Find an available DN: Use LD 20
REQ: PRT
TYPE: LUDN
CUST 0
DN (press enter to get complete list of all, or type 3, 4, or 5 to get a list of just those numbers)... Example DN 46

To find an available TN: Use LD 20
REQ: luvu
TYPE: 2000 (for digital sets) or 500 (for analogue sets)
TN
TYPE 2000 TN 004 0 06 15 8D VCE

Now you're ready to use the CPY command

 

[GHTROUT]

Regarding the NAME problem. If you are changing the following:

NAME Jonathan Appleton
to
NAME John Apple

You can use CHG and enter the NAME this way:

NAME John, Apple

The 'comma' essentially overwrites everything that follows it, so you end up with John Apple (as opposed to John Appleppleton)

GHTROUT.com | FAQs | Recent Replies

 

[Q6600]

Got the new phone werkin.

Thanks to all for the great help.

 

[Q6600]

Also forgot -

What GHTROUT posted is exactly why I used the out/new - didnt know about the CHG/comma, would end up with "John Appleppleton" before in the above example.

 

[NARSBARS]

When I copy the switch does not let me make the new phone the same Key 0 DNB as the source. I always make it a fake number and then change it. Is there some way to simply copy ext. 1234 to a blank TN as ext. 1234?

NARSBARS

 

[hawks]

You have to make the DN a unique number for the copy, and then you can go back and change it to whatever you want.