Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Clock soure on external 11C

Status
Not open for further replies.
goland

goland

IS-IT--Management
Nov 15, 2003
85
CA
Hi,
i have a nortel 61 C and a remote 11c
There is a TIE line between the 2 loop 25 in 61 to loop 8 in 11C.

The pref clock source for the remote was on Card 5
That t1 came out of service so we tried switching the clock source to another card not realizing the piggy back CC was on that card. We now put a live T1 back in card 5 because it has the piggy backed clock controller on the card but I am a little lost now.
I can't seem to get the pref CC set to the card in slot five on the 11C. so now my tie line wont come up.
Any thought on what i have done here and how Imay go about setting the 11 c CC pref to card 5.
Thanks you in advance.
wyles
 
Sort by date Sort by votes
you can use freerun as a clock source as a temp step.. unless the t1 is up you can't clock from card 5.. you can move a clock and change the clock source in ld 73
Code: 
REQ  prt

TYPE ddb
PREF 3
SREF 17

i'm using loop 3 in my 81 (ld provider) and 17 (local) as my backup.. the 11 needs to clock off ofthe 61 the 61 needs to clock off of the ld carrier or at least the local..

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
when you loose clock source, rcnt in ld 60 clears the counters and allows that span to recover... when lcnt hits thresholds, the t goes down

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Thanks Ace,
Here is what it looks like now:

DTI002

.stat

PRI* TRK LOOP 3 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
PRI* TRK LOOP 4 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
PRI* TRK LOOP 5 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE TIE VCE CH 02 - IDLE TIE VCE
CH 03 - BUSY TIE VCE CH 04 - BUSY TIE VCE
CH 05 - IDLE TIE VCE CH 06 - IDLE TIE VCE
CH 07 - BUSY TIE VCE CH 08 - BUSY TIE VCE
CH 09 - IDLE TIE VCE CH 10 - IDLE TIE
CH 11 - IDLE TIE VCE CH 12 - IDLE TIE VCE
CH 13 - IDLE TIE VCE CH 14 - BUSY TIE VCE
CH 15 - BUSY TIE VCE CH 16 - IDLE TIE VCE
CH 17 - IDLE TIE VCE CH 18 - BUSY TIE VCE
CH 19 - BUSY TIE VCE CH 20 - IDLE TIE VCE
CH 21 - IDLE TIE VCE CH 22 - BUSY TIE VCE
CH 23 - BUSY TIE VCE CH 24 - IDLE TIE VCE

PRI* TRK LOOP 6 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
PRI* TRK LOOP 7 - ENBL
FFMT/LCMT/YALMT: ESF/B8
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - BUSY TIE VCE CH 02 - BUSY TIE VCE
CH 03 - DSBL TIE VCE CH 04 - BUSY TIE VCE
CH 05 - BUSY TIE VCE CH 06 - DSBL TIE VCE
CH 07 - DSBL TIE VCE CH 08 - DSBL TIE VCE
CH 09 - DSBL TIE VCE CH 10 - DSBL TIE VCE
CH 11 - DSBL TIE VCE CH 12 - DSBL TIE VCE
CH 13 - DSBL TIE VCE CH 14 - DSBL TIE VCE
CH 15 - DSBL TIE VCE CH
CH 17 - DSBL TIE VCE CH 18 - DSBL TIE VCE
CH 19 - DSBL TIE VCE CH 20 - BUSY TIE VCE
CH 21 - DSBL TIE VCE CH 22 - DSBL TIE VCE
CH 23 - DSBL TIE VCE CH 24 - DSBL TIE VCE

PRI* TRK LOOP 8 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - DSBL TIE VCE * CH 02 - DSBL TIE VCE *
CH 03 - DSBL TIE VCE * CH 04 - DSBL TIE VCE *
CH 05 - DSBL TIE VCE * CH 06 - DSBL TIE VCE *
CH 07 - DSBL TIE VCE * CH 08 - DSBL TIE VCE *
CH 09 - DSBL TIE VCE * CH 10 - DSBL TIE VCE *
CH 11 - DSBL TIE VCE * CH 12 - DSBL TIE VCE *
CH 13 - DSBL TIE VCE * CH 14 - DSBL TIE VCE *
CH 15 - DSBL TIE VCE * CH 16 - DSBL TIE VCE *
CH 17 - DSBL TIE VCE * CH 18 - DSBL TIE VCE *
CH 19 - DSBL TIE VCE * CH 20 - DSBL TIE VCE *
DCH: 61 RLS REMOTE TIME: 13:28:42 7/09/2006

CH 21 - DSBL TIE VCE * CH 22 - DSBL TIE VCE *
CH 23 - DSBL TIE VCE * CH 24 - DCH 61

DTA005 8


.****
OVL000
>ld 96
DCH000
.stat dch
DCH 061 : OPER RLS AUTO DES : TIE_OPT61C
.
 
Upvote 0 Downvote
ld 60
trac pck

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Thanks for the quick help guys,
I do have a working T1 back in card 5.
I have been resetting the counters.
My main concern (I think) is to get the CC pref set back to card 5 to fix what ever got screwed up last night.
the 61 is fine and does get its clock from telco.
I cant seem to change the ddb in ld 73 to set the
pref of CC0 to card 5.
 
Upvote 0 Downvote
trac pck does not work
in the 11 c right now the CC0 is disabled and I am unable to enmable it in ld 73 using
enl cc 0
 
Upvote 0 Downvote
here is my counters
I also reset them. I also included my ssck 0 and the DDB in ld 73
see below:

.lcnt

PRI TRK LOOP 3
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 4
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 5
TRSH CNT:
BPV -000
SLIPD -208
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 6
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -0
OS_LOSFA-000 TIE VCE
OS_YEL -000H 22 - BUSY


PRI TRK LOOP 7
TRSH CNT:
BPV -000
SLIPD -208
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 8
TRSH CNT:
BPV -000
SLIPD -203
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -015




.ssck 0
DSBL

IP DB PORT 1 DSBL
IP DB PORT 2 DSBL
IP DB PORT 3 DSBL
IP DB PORT 4 DSBL
CABINET CLK SRC: IP DB




DISK RECS AVAIL: 359
REQ prt
TYPE dd
DCH: 61 RLS REMOTE TIME: 13:44:20 7/09/2006
b

CC0 3
PREF CC0 FREE RUN
SREF CC0 FREE RUN

TRSH 00
RALM 128
BIPC 128
LFAC 128
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 127
SRMM 127
ICS
 
Upvote 0 Downvote
ld 60 to enable the clock, your trsh is set default which is not that bad..

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
ld 60
enl cc 0

ssck 0

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
I have tried and it won't let me
tells me cc cant be accessed DTI0003
 
Upvote 0 Downvote
the daughter board is still on the card, you may have a bad clock controller..

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
it worked fine until we tried to switch CC card last night. We never touched the 5th card where the CC daughter was.
That is why I thought today putting a live T back in the 5th card we would be able to get it back to the way it was yesterday
CC 0 pref 5
CC 0 sref frun

there seems to be a CC 3 hanging around to
??
 
Upvote 0 Downvote
might want to ini that 11, they seem to get confused pretty easy.. i never ini a large switch but am pretty quick on the silver bullet with the 11's.. nortel tech support used to call the 11 a cow, corruption on the wall

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Not clear on what INI means.
How would i go about that.
thx.
 
Upvote 0 Downvote
blsck button on the front of the ssc card, service will go down, system will restart...

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
INI= Initialize, take about 20 Sec, it the button on the front of the SSC card.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ATMFIRE
  • Locked
  • Question
OPTION 11C keys actiation
Replies
3
Views
276
Firebird Scrambler
Firebird Scrambler
nihaalrai236
  • Locked
  • Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
487
Firebird Scrambler
Firebird Scrambler
Ozphonebloke
  • Locked
  • Question
Option 11C PSU cct diagram or voltage pinout
Replies
1
Views
184
Ozphonebloke
Ozphonebloke
lexer
  • Locked
  • Question
Meridian 11c and asterisk interconnection using PRI
Replies
7
Views
256
RS528
RS528
CentralJIM
  • Locked
  • Question
no caller ID on PRI external call
Replies
5
Views
226
CentralJIM
CentralJIM

Part and Inventory Search

Sponsor

Back
Top