Clock Controller 2

[pigsooie]

I have a question about the reply when I do SSCK 1.This is the response I get, can anybody tell me what the VCXO Aging is? By the way this is from an opt 81
ENBL
CLOCK ACTIVE
GROUP 1
SIDE 1
CLOCK CONTROLLER - TRACK ON LOOP 41
PREF - 41
SREF - 16
AUTO SWREF CLK - ENBL
VCXO AGING


CLOCK ACTIVE
GROUP 1
SIDE 1
CLOCK CONTROLLER - TRACK ON LOOP 41
PREF - 41
SREF - 16
AUTO SWREF CLK - ENBL
VCXO AGING

Thanks for the help Mike Patti

 

[srmega41]

According to the NTP, if VCXO = AGING ERROR, then the crystal is faulty and the CC should be replaced. Are you seeing any clocking errors?

My 81 does not even show that VCXO prompt, so I would suspect you have a bad card. Action = REPLACE CC 1. (You could try reseating the card, but I doubt that would help much)

Hope this helps,

Scott M.

 

[johnpoole]

if you disable that cc and reseat it, the aging will go away. the only time i've seen it, that was all it took to fix the problem

john poole
bellsouth business
columbia,sc

 

[srmega41]

Sounds much better than my ideas.

Scott M.