client to client connection

[nofeerst]

We have a Cisco 3005 Concentrator and the latest release of the Cisco VPN client.

Everything is working correctly, except vpn clients can't see or connect to resources of another connected vpn client. Is this situation normal or can it be acomplished with the right config?

I'm guessing it's some internal routing problem with the Concentrator.

Thanks

 

[msworld]

Correct. it is routing issue. posting the configuration here may help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com

 

[nofeerst]

Should i post the entire config file?

 

[nofeerst]

msworld, do you have similar setup and your vpn users can ping each other?

 

[msworld]

It could be a name resoltuion issue too. Can you ping the remote computer by IP?

Do you have similar settings? Check thses links, they may help,

How to setup VPN
Start Cisco VPN before logon Windows domain. How to add DNS and WINS into your
Cisco VPN server. If your VPN client cannot find servers or cannot ping ...

http://www.howtonetworking.com/Windows/vpnsetup.htm

- Similar pages

Routng how to
The following examples have been tested only with Cisco's VPN solution; ...
Some Cisco VPN clients can embed the IPsec packets into a UDP/TCP port that is ...

http://www.howtonetworking.com/Networking/routing.htm

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com