Client H323

[cevamisto]

Hi,

I have 3 PBX (2 are Succession rls 3.0 and one is CallServer rls 4.0) and all 3 pbxs are interconnect using NRS.
The customer want to install a video coference system in 2 sites (both are succession 3.0) using client H323. The customer ask me if the PBX know about client H323. I looked into documentation and i didn't find about the telephone "to look like" a client H323.
Somebody have any idee about this?

Thank you,
Mike

 

[johnpoole]

bri, misp cards would be my approch, then voip with h323 protocol will work. the bri would give you the switched bonded channels i normally assosiate with vidio

john poole
bellsouth business
columbia,sc

 

[cevamisto]

Thank Johnpoole for the answer, but in this moment the customer changed the request, he dosen't want to connect to pbx so I can do anything.

For my information, do you have a configuration of BRI for this client H323?

Thank you,
Mike

 

[cevamisto]

Bad news, because customer want to integrate the video conference with pabx. So I'll use the BRI.
Any ideea how to configure the BRi for video conference?

Thanks,
Mike