CLID with ACD sets

[absinthium]

Hi,

I have a problem at the moment where the ACD sets dont send the CLID from the table entry in the ACD key. I have the CLID tables setup correctly and enabled, as all other sets send CLID correctly. Just ACD sets dont send anything at all. Here is the TNB for one in question.

DES 3904
TN 020 0 01 06
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 36
SCI 0
SSU 0010
LNRS 16
XLST
SCPW 0000
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPA STSA
MWA RMMD SMWA AAD IMD XHD IRD NID OLD VCE DRG4
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMA LLCN MCTA CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITA CNTD CLTD ASCD
CPFA CPTA ABDD CFHA FICD NAID BUZZ AGRD MOAD
UDI RCC HBTA RLFA AHA DDGD NAMA MIND PRSD NRWD NRCD NROD
DRDA
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT
LHK 2
PLEV 01
SPID 1019
AST
IAPG 0
AACS NO
ITNA NO
DGRP
PRI 02
MLWU_LANG 0
DNDR 0
KEY 00 ACD 1777 1 1399
SUPY ACID 1019 KEY 32
01 DIG 777 88 V
02 SCR 9788 1 MARP
DNRO 0
DNRI 0
CPND
CPND_LANG ROMAN
NAME Tony Williams
XPLN 27
DISPLAY_FMT FIRST,LAST
03 NRD
04 MSB
05 DWC 1777
06 SCR 9292 1 MARP
DNRO 0
DNRI 1
07
08 DIG 1 4 V
09 ADL 20 082495291
10 ADL 20 00407290531
11 SCR 8626 11 MARP
DNRO 0
DNRI 0
12
13
14
15
16 MWK 9977
17 TRN
18 AO6
19 CFW 16
20 RGA
21 PRK
22 RNP
23 SSU 0010
24 PRS
25 CHG
26 CPN
27
28
29
30
31


Any help would be grand!!!

 

[dlesap]

Give a copy of the CLID table also.

 

[absinthium]

Hi,

Ok here's my CLID

INTL 61
ENTRY 0
HNTN 2
HLCL 94879111
DIDN NO
HLOC 9487
LSC
ENTRY 1
HNTN 2
HLCL 9487
DIDN YES
HLOC 9487
LSC
ENTRY 10
HNTN 02
HLCL 94738850
DIDN NO
HLOC 9473
LSC
ENTRY 11
HNTN
HLCL 9473
DIDN YES
HLOC 9473
LSC

I am in Australia so things are slightly different.

Thanks for your help

 

[dlesap]

Hi
Just monitor the D-channel and look what is the Calling number :
LD 96 - ENL MSGO x MON 0
You may have MTC and BUG on the TTY port you are connected to and LD 17 ERRM BUG to see that messages. You may also RST MON in LD 96.
If the number is correct, you have to ask the provider if that number is CLID transparency for him. It's also called CLIR and must be set to NO on the provider side.
Regards

I'm in Europe...