CLID problem

[absinthium]

Hi all,

I have an 81c, Rel 24.30 with ISDN outgoing trunking using AC2. I have added a new entry to the CLID table to cater for a newly acquired number range. Problem is, that now for sets addressing this new entry, somehow the call gets placed over another carrier other than our preselected one!!! Its like it somehow adds an override code to the digits dialled. It only happens with sets addressing this new CLID table entry. If i change the entry and copy the numbers of the original number range, the call goes out normally......*way confused*

Also, what does the PFX1 and PFX2 do?

Here is my setup

INTL 61
ENTRY 0 <-----Original number range
HNTN 2
HLCL 94870000
DIDN NO
HLOC 9487
LSC
ENTRY 1 <------Original number range
HNTN 2
HLCL 9487
DIDN YES
HLOC 9487
LSC
ENTRY 2 <--------New number range
HNTN 2
HLCL 94730000
DIDN NO
HLOC 9473
LSC
ENTRY 3 <------New number range
HNTN 2
HLCL 9473
DIDN YES
HLOC 9473
LSC
ENTRY 10 <-----Test entry
HNTN
HLCL
DIDN NO
HLOC
LSC
ENTRY 11 <-------Test entry
HNTN
HLCL
DIDN NO
HLOC
LSC

Basically Entry 0 and 1 calls go out normally, but entry 2 and 3, calls go to another carrier....EVERYTIME!!!

Thanks for any help!