Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID pass through an ASM8

Status
Not open for further replies.

Telcotec

Programmer
Oct 14, 2013
2
US
I am trying to determine if CLID info can be sent through an ASM8 to an analog port? CLID is working on a digital set but not through the ASM8. We think it's enabled everywhere it should be, but any ideas?
 
I do not recall an ATA on a Norstar every passing CLID, I thought it was only the BCM's newer modules that could.


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Thank you MooreTel. I don't recall built in Analog ports other than the ones used for the emergency phone etc. Is that what you're referring to? Do you know if an ATA is the same as far as not passing CLID? bummer, we need this to use with a Viper.
thanks again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top