CLID over PRI

[proactiv]

I have a MICS Ver 7.0 with a PRI. Inbound caller ID is not displayed on the phone set until the call is answered, which defeats the purpose of caller ID.

I opened a ticket with the local provider to see if there was an issue with the D-channel or supervision. They pointed the finger back at me.

Is there a setting which will pass the info digits to the phone set without answering the call first.

 

[PERRYPJ]

Try this thread 799-1549218, or do a Search on CLID

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[RikRodgers]

Clid will only display on a ringing set. If the lines are ringing there, go to Term&Sets/Telco features, and make sure Clid is enabled for those ringing lines, and select whether you want them to see name or number first.

 

[proactiv]

It is working!

Thanks