CLID not updating from TIE to PRI trunk

[lvjoe]

On a CS1000E, the CLID table is not being applied when sending the call thru the TIE trunk. CDP is set as the call type for the TIE trunk but it looks like the NPA/NXX tables are being skipped even though they work for local phones.

DCH 20 IMSG SETUP REF 00008191 CH 96 1 5 0 TOD 15:28:47
CALLING #:2504 NUM PLAN: PRIVATE/ABBREVIATED (CDP)
CALLED #:1051702xxxxxxx NUM PLAN: E164/INTERNATIONAL (UNKNOWN)

DCH 13 UIPE_OMSG CC_SETUP_REQ REF 00000241 CH 53 22 TOD 15:28:47 CK 0BA6E4AC
PROGRESS: INTERWORKING WITH PRIVATE WORK
CALLING #:2504 NUM PLAN: PRIVATE TON: ESN CDP
CALLED #:1702xxxxxxx NUM PLAN: E164 TON: NATL

DCH 20 OMSG CALLPROC REF 00008191 CH 96 1 5 0 TOD 15:28:47

Can someone help?

 

[Avaya911PLM]

If the CS1000 recieves a CLID on a tandem call, it will not do anything to modify it. It is the responsibility of the originating side to compose the proper CLID.

You can assign a CLID table to a Route Data Block with the CLEN prompt. This will define a CLID table to use if NO CLID is received. If a CLID (any CLID) comes in, the assumption is that the originating node has composed the proper CLID for the call.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911