I am working on a CD1000-5.x with a qsig RPI interface to a Audio Codes media gateway into MS OCS.
When the OCS user calls out the person they called only see the main listed number i.e 7800
I see on the gateway that the call is being presented to the PBX with the caller info.
Here is a trace from PBX
.enl msgi 1
OUTPUT TARGETS: TTY OUTPUT TARGETS: LOG
.enl msgo 1
OUTPUT TARGETS: TTY OUTPUT TARGETS: LOG
.
DCH 1 UIPE_IMSG CC_SETUP_IND REF 000005A2 CH 3 23 TOD 11:01:00 CK EF3F9809---THIS WAS A CALL TO 5115
CALLED #:5115 NUM PLAN: UNKNOWN TON: UNKNOWN------------------------------------------------------DOES NOT KNOW WHAT TYPE OF CALL---SHOULD BE CDP
CALLING #:18038227909 NUM PLAN: UNKNOWN TON: NATL
DCH 1 UIPE_OMSG CC_PROCEED_REQ REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F980A
DCH 1 UIPE_OMSG CC_ALERT_REQ REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F9814
DCH 1 UIPE_OMSG CC_SETUP_RESP REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F9C5F
CONNECT #:5115 NUM PLAN: UNKNOWN TON: UNKNOWN
DCH 1 UIPE_IMSG CC_SETUPCOMP_IND REF 000005A2 CH 3 23 TOD 11:01:00 CK EF3F9CA1
DCH 1 UIPE_IMSG CC_DISC_IND REF 000005A2 CH 3 23 TOD 11:01:08 CK EF3FD9BF
CAUSE: #16 - NORMAL CALL CLEARING
DCH 1 UIPE_OMSG CC_RELEASE_REQ REF 000085A2 CH 3 23 TOD 11:01:08 CK EF3FD9C0
DCH 1 UIPE_IMSG CC_RELEASE_CONF REF 000005A2 CH 3 23 TOD 11:01:08 CK EF3FD9EE
DCH 1 UIPE_IMSG CC_SETUP_IND REF 000005A3 CH 3 23 TOD 11:01:18 CK EF402580-------------------OUTSIDE CALL TO CELL
CALLED #:94132194 NUM PLAN: UNKNOWN TON: UNKNOWN-----------------------------------------------SHOULD BE NATIONAL
CALLING #:18038227909 NUM PLAN: UNKNOWN TON: NATL
DCH 1 UIPE_OMSG CC_PROCEED_REQ REF 000085A3 CH 3 23 TOD 11:01:18 CK EF402583
DCH 1 UIPE_OMSG CC_ALERT_REQ REF 000085A3 CH 3 23 TOD 11:01:20 CK EF40303E
PROGRESS: INBAND INFO OR PATTERN IS AVAIL
DCH 1 UIPE_IMSG CC_DISC_IND REF 000005A3 CH 3 23 TOD 11:01:30 CK EF4083B1
CAUSE: #16 - NORMAL CALL CLEARING
DCH 1 UIPE_OMSG CC_RELEASE_REQ REF 000085A3 CH 3 23 TOD 11:01:30 CK EF4083B2
DCH 1 UIPE_IMSG CC_RELEASE_CONF REF 000005A3 CH 3 23 TOD 11:01:30 CK EF4083FB
What are the steps to get the pbx to present the caller line id?
Thanks
AH
When the OCS user calls out the person they called only see the main listed number i.e 7800
I see on the gateway that the call is being presented to the PBX with the caller info.
Here is a trace from PBX
.enl msgi 1
OUTPUT TARGETS: TTY OUTPUT TARGETS: LOG
.enl msgo 1
OUTPUT TARGETS: TTY OUTPUT TARGETS: LOG
.
DCH 1 UIPE_IMSG CC_SETUP_IND REF 000005A2 CH 3 23 TOD 11:01:00 CK EF3F9809---THIS WAS A CALL TO 5115
CALLED #:5115 NUM PLAN: UNKNOWN TON: UNKNOWN------------------------------------------------------DOES NOT KNOW WHAT TYPE OF CALL---SHOULD BE CDP
CALLING #:18038227909 NUM PLAN: UNKNOWN TON: NATL
DCH 1 UIPE_OMSG CC_PROCEED_REQ REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F980A
DCH 1 UIPE_OMSG CC_ALERT_REQ REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F9814
DCH 1 UIPE_OMSG CC_SETUP_RESP REF 000085A2 CH 3 23 TOD 11:01:00 CK EF3F9C5F
CONNECT #:5115 NUM PLAN: UNKNOWN TON: UNKNOWN
DCH 1 UIPE_IMSG CC_SETUPCOMP_IND REF 000005A2 CH 3 23 TOD 11:01:00 CK EF3F9CA1
DCH 1 UIPE_IMSG CC_DISC_IND REF 000005A2 CH 3 23 TOD 11:01:08 CK EF3FD9BF
CAUSE: #16 - NORMAL CALL CLEARING
DCH 1 UIPE_OMSG CC_RELEASE_REQ REF 000085A2 CH 3 23 TOD 11:01:08 CK EF3FD9C0
DCH 1 UIPE_IMSG CC_RELEASE_CONF REF 000005A2 CH 3 23 TOD 11:01:08 CK EF3FD9EE
DCH 1 UIPE_IMSG CC_SETUP_IND REF 000005A3 CH 3 23 TOD 11:01:18 CK EF402580-------------------OUTSIDE CALL TO CELL
CALLED #:94132194 NUM PLAN: UNKNOWN TON: UNKNOWN-----------------------------------------------SHOULD BE NATIONAL
CALLING #:18038227909 NUM PLAN: UNKNOWN TON: NATL
DCH 1 UIPE_OMSG CC_PROCEED_REQ REF 000085A3 CH 3 23 TOD 11:01:18 CK EF402583
DCH 1 UIPE_OMSG CC_ALERT_REQ REF 000085A3 CH 3 23 TOD 11:01:20 CK EF40303E
PROGRESS: INBAND INFO OR PATTERN IS AVAIL
DCH 1 UIPE_IMSG CC_DISC_IND REF 000005A3 CH 3 23 TOD 11:01:30 CK EF4083B1
CAUSE: #16 - NORMAL CALL CLEARING
DCH 1 UIPE_OMSG CC_RELEASE_REQ REF 000085A3 CH 3 23 TOD 11:01:30 CK EF4083B2
DCH 1 UIPE_IMSG CC_RELEASE_CONF REF 000005A3 CH 3 23 TOD 11:01:30 CK EF4083FB
What are the steps to get the pbx to present the caller line id?
Thanks
AH