Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID for a CDN

Status
Not open for further replies.

Radero0000

Technical User
Nov 15, 2007
23
MD
Hi

I've this scenario.

made a CDN (500) on a cs1k 7.6

Acquired this cdn on AACC 6.2

in the master the value cdn 500 execute a script

In the script just a route call to an external number (the external number is a variable from a db which we control by an android application, that's why i didn't made all this on a DN)

The called get just the root number clid

Is possible to show also the CDN number or somethig else with the root number?

Thank you:


this is the print of cdn:

>ld 23
ACD000
MEM AVAIL: (U/P): 96791114 USED U P: 6143003 718232 TOT: 103652349
DISK SPACE NEEDED: 992 KBYTES
ACD DNS AVAIL: 23214 USED: 786 TOT: 24000
REQ prt
TYPE cdn
CUST 0
CDN 500

TYPE CDN
CUST 0
CDN 500
FRRT 31
FRT 2
SRRT
FROA NO
MURT 30
CDSQ NO
DFDN 39003
NAME NO
CMB NO
CEIL 2047
CLRO NO
OVFL NO
TDNS YES
RPRT NO
AACQ YES
ASID 16
SFNB 4 6 9 10 11 12 13 16 17 18 23 24 26 28 33 34 35 36 37 38 39
USFB 1 2 3 4 5 6 7 9 10 11 12 13 14 15
CALB 0 1 2 3 4 5 6 7 8 9 10 11 12
CNTL YES
VSID
HSID
CWTH 1
BYTH 0
OVTH 2047
STIO
TSFT 20
 
no, the CDN is not a valid pstn number, so by sending the call to the external number, only valid e.164 will show.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top