Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLI over PRI 2

Status
Not open for further replies.
Qamar177

Qamar177

Technical User
May 28, 2019
64
PK
Hi , I am facing an issue in Meridian 11C.
CLI is working quite well when someone calls internally/lically,but when some external call is received no CLI is working.
Please guide.CLS CNAA and CNUA is enabled on every extension.
 
Sort by date Sort by votes
I would check with your carrier to see if they are sending it over the PRI.
 
Upvote 0 Downvote
If nothing else changed then I would suspect the carrier. Another thing to try would be to disable the D-Channel and PRI and then enable everything. Typically these things just don't quit working. Something changed.
 
Upvote 0 Downvote
turn on the DCH messaging in 96 make sure your sending a CALLING number, if so pass it to the carrier.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lexer
  • Locked
  • Question
Meridian 11c and asterisk interconnection using PRI
Replies
7
Views
271
RS528
RS528
CentralJIM
  • Locked
  • Question
no caller ID on PRI external call
Replies
5
Views
247
CentralJIM
CentralJIM
telepath
  • Locked
  • Question
Lost E1 PRI link
Replies
1
Views
119
Firebird Scrambler
Firebird Scrambler
phonetech2012
  • Locked
  • Question
internal call over tie line sending wrong digits
Replies
2
Views
121
bignose21
bignose21
TNieland
  • Locked
  • Question
PRI trouble on MG1000E PRI
Replies
6
Views
159
TNieland
TNieland

Part and Inventory Search

Sponsor

Back
Top