CLI outbound

[MBX]

Hello all,
When I call out from an extension on my option 11, r25, the CLI the called party receives is the main number of my DID truck group. How can I make my extensions CLI appear to the called set?
Thanks!

 

[wdhb]

As long as all your extns have a ddi and the ddi numbers match the extn range, (ie no crazy mapping in LD 49, IDC table), then you can do this in LD 15 in the NET data block. You need to set CLID to yes & then create a entry, say 0 with DIDN set to YES. CLID entry 0 = the 0 after the DN in LD 10/11

 

[cmawbey]

MBX
what i had to do was

LD16
req=chg
type RDB
<cr> till yer get LID
LID=1 ( this sends the last 4 digits)

it worked for me LID= line indentities Option Colin