I am running into a serious problem. The drive that Arcserve 2K sits on is completely filled. This is causing my backups to fail. I went into the LOG directory and deleted everything I could. There is a TAPE log file that is huge, but I can't delete it. How can I clear all log files within the ARCServe2K program? I've looked every where and can't find anything to clear my logs. There has to be a proper way of doing this. Much help appreciated. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Clearing the ARCServe Log files
- Thread starter EBG510
- Start date
speshalyst
IS-IT--Management
Hi,
Stop all the ARcserve Engines.
Go to the ARCserve Server Admin\Configuration\Tape Engine Tab
Set the Logging Level to "None"
Delete all the logs in the Log folder.
Restart all the engines.
Cheers
Speshalyst So it Shall be Written!
So it Shall be Done!!
Stop all the ARcserve Engines.
Go to the ARCserve Server Admin\Configuration\Tape Engine Tab
Set the Logging Level to "None"
Delete all the logs in the Log folder.
Restart all the engines.
Cheers
Speshalyst So it Shall be Written!
So it Shall be Done!!
- Status
