Clear transfer kit message on Phaser 750 1

[Nandus]

We have a Phaser 750 that had the transfer kit replaced. Normally after this part is replaced it will ask you if it has been replaced so that the consumables list will get reset. This time this was overlooked so now the printer keeps displaying that it needs to be replaced. The consumables page shows that it also needs replaced. How can this be manually reset?

 

[xeroxvendor]

While the printer's front panel displays Ready, press the Help button once. The front panel displays Help Guide.

Press the right arrow ( --->) button until the panel displays Supplies Information.

Press Menu once; the panel displays Supplies Page.

Press the right arrow (--->) until the panel displays Supplies Status.

Press Menu once; the panel displays Imaging Unit.

Press the right arrow (--->) until the panel displays Transfer Kit.

Press Menu once; the panel displays Percent Remaining.

Press the Menu button, the panel displays XX% Remaining.

Press the Reset button, the panel displays Reset Transfer Kit?.

Press the Confirm button.


David Drury
Northeast Laser Image

http://www.northeastlaserimage.com

 

[Nandus]

These detailed notes worked very well. Thanks so much! ;-)