cleaning pickup rollers DJ930C 1

[mommacache]

I can't seem to find anything on the HP site about cleaning rollers on the 930C or any 900 series printer for that matter. I could clean them from the top, but was wondering if there was another way?
Thanks

 

[k1c2]

Best thing is to remove the cover. Check around bottom edge for release tabs.

 

[LaserLisa]

HP actually makes a device to clean pickup rollers, it's basically a brillo pad on springs. The best way to resurface rollers manually is to take the scrubby part of a brillo, douse it in some INX solvent and hold it under the rollers one at a time while running a test print (with the paper tray removed, of course). just keep hitting the resume button to clean the next roller. Once for each roller should be plenty.