Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
cleaning HP 8550 color laser
- Thread starter wallst32
- Start date
Start by disconnecting the printer from the power surge, then remove all consumables from the printer (toners, drum, belt and fuser). Empty the excess waste toner bin below the toner carousell. Use use a small vacuum cleaner to suck up excess toner in any area you can reach. Use a cloth where you cannot reach with the vacuum cleaner. Check that the red-brown layer on the fuser is not too worn or scrathed. If there is excess toner burned stuck to it, use some cleaning fluid (like for cleaning music CD´s) on a cloth and rub carefully. If the layer looks OK underneath, reseat the toner.
- Status
Similar threads
- Locked
- Question
- Locked
- Question