Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CiscoWorks2000 questions

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
Hello
I've to ask some question about CiscoWorks.
1)What is the different possible task using the two access level "admin" adn "guest" in CiscoWorks?

2)Why IPM must be installed in a different machine in order to enable SSL?

Thanx... some other question are going to be asked here... :)

Thanx to all.
Fulvio
 
Number 1, under Server Confih, look for the folder that has the right explained.
Number 2, the only answer I know is that is the way you have to install it.
 
IPM must be installed on a different machine to enable SSL because IPM is not programmed to support SSL yet. I do believe that there is a workaround that involved installing, deinstalling, flipping bits, etc that Cisco has on their web site to have IPM on the same server and enable SSL. Todd Hethmon
thethmon@hethmon.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top