digitalnet1
Technical User
I am running HP NNM and Ciscoworks2000 in two saprate Windows2000 servers, I know there is a way you can integrate HP NNM to cw. Anyone hear did this. If so could you please provide me the info.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ciscoworks2000 NNM integration
- Thread starter digitalnet1
- Start date
- Status
Actually, i'd be pretty interested in this myself. We have a copy of CiscoWorks 2000 laying around, but were told by our support staff we weren't allowed to install it, and instead they gave us this crippled CiscoWorks 6.0.
It'd be great if i could sneak 2000 onto a seperate machine, but still have the integrative qualities.
It'd be great if i could sneak 2000 onto a seperate machine, but still have the integrative qualities.
- Thread starter
- #3
digitalnet1
Technical User
We used to run the old HP NNM, and that had the ciscoworks 4.0 intigrated in it. That was very good. on the NNM map toolbar you have all the ciscoworks options, like, ciscoview, config Manager etc. and was using SNMP so that was very easy to Push config changes to device, and also have the option like, device to db and db to device config transfer. now the new NNM only way you can use those option is you need to install ciscoworks 2000, and intigrat that to NNM. and the new ciscoWorks2000 have to telnet to the device do any config push or changes, not by SNMP.
alistaircarnegie
MIS
check out this links for nnm/cw2k integration
Hope this helps.
Hope this helps.
- Status
Similar threads
- Locked
- Question