We used a mulititech VOIP gateway to 4 digit dial into a vertical phone system. routing worked as should for our internal network calling. We have now swapped in a CiscoVG202 in place of the multitech unit and call routing is now utilizing outside Comcast network. Anyone see this before? NOTHING has changed on Vertical system. CiscoVG is the only difference in this scenario. ALSO, we have this setup at other locations and it works as should. CiscoVG202 config is the same and Vertical system config is the same.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CiscoVG202 and Vertical PBX - routing calls
- Thread starter mutantx
- Start date
Similar threads
- Locked
- Question