Cisco WS-X2948G-GE-TX multicast igmp enable 1

[cammy]

Hi

I'm trying to setup igmp snooping on our catos switches (WS-X2948G-GE-TX running software 8.4(11)), but the command set igmp enable is simply not available. Everything I read suggests that igmp snooping should be supported. I can set cgmp enable.

2948.185 (enable) set igmp ?
  filter                     Set IGMP filter
2948.185 (enable) set igmp snooping
Usage: set igmp filter (enable|disable)
Usage: set igmp filter profile <profileid> match-action (permit|deny)
Usage: set igmp filter profile <profileid> <ip>
Usage: set igmp filter map <profileid> <mod/port>

Bit of a vague question but how do I switch on snooping on these switches?

Thanks

Cammy

 

[ADB100]

Not supported on this platform:

http://www.cisco.com/c/en/us/support/docs/ip/ip-multicast/29480-167.html

Andy

 

[cammy]

Damn. Looked at the wrong model number yesterday on that page. That's a real annoyance as our 3750 doesn't support cgmp

Cheers

Cammy