Cisco WLC-4400 Association

[ifoam]

I have a WLC on a 9 Subnet using address 192.168.9.13.

I have a LWAPP on a 85 subnet using the address 192.168.85.241.

I can't get them to asociate with each other! What do I need to do to get these to work? Do I need to create another interface?

LWAPP's on the 9 subnet work and associate fine. Any other subnet doesn't work.

 

[Packet7]

Hello,

You can either use DHCP option 43 or DNS (CISCO-LWAPP-CONTROLLER.yourdomain.com). See link below. Hope this helps. Good luck.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

Rgds,

John