Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CISCO VWIC QSIG problem when calling using BP 128

Status
Not open for further replies.

Wachange

Technical User
Jan 27, 2006
32
SO
Dear All

I am experiencing QSIG problem with BP 128it that is connected in network to Cisco 2800 VWIC. When I receive the calls from the remote site, they display the extension number of the caller. When I call, my number does not display my details to the remote site. Instead it displays 729.

If i pick a trunk directly from the and dial from my location, the remote site receives my extension number. However if i use the route number and select the trunks randomly, the remote site displays 729.

Please assist

Wachange
 
Instead of using just a route, try to use PNR - there you can select type of number presented to Cisco...
 
One question: if you pick individually this same trunk 729 and dial, the problem still happening? or the ext number is showed on destination?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top