Cisco VPN Static Route

[kevmullet]

Hi,

I have an ASA setup with VPN clients and split tunneling, all which works well, however i need for the users to be able to access another network of ours through another route sitting on our LAN.

I am assuming I need to send a static route to the client, as I have the route in the ASA but when the client is connected the route is not in the route print table.

Any help appreciated. CLI or ADSM.

Thanks

 

[garnetbobcat]

Since you already have split tunneling working, all you should have to do is add that new network to your split tunnel list.

Matt

http://www.wr-mem.com

 

[brianinms]

Additionally you will have to add the other network to your No Nat access-list.

 

[tpulley]

Also you would need to insure that the other router knows about and has a route back to the ASA for this subnet.

 

[kevmullet]

Thanks guys,

Adding the networks to split-tunneling list did it, had a bit of trouble as i wanted to use the supernet 10.0.0.0/8 to cover all the subnetted 10. networks, but added the important ones to the slit-tunnel list and it worked.

Cheers