CISCO VPN - Help with connecting to remote lan

[dspeciale]

I am trying to setup a vpn. I am using cisco client version 4.6
I am having trouble getting to my remote lan.
I can connect and receive and ip from the vpnpool from the firewall, but I cannot ping or access any resources on the network.

I keep going over my config and I can't figure out what I am missing.

Thanks,
Dee


Links to my config:
Switch

http://docs.google.com/Doc?id=dmtt4nj_32fhpnvwd3

Firewall

http://docs.google.com/Doc?id=dmtt4nj_33c3ng6dhq

 

[LarryTheCucumber]

I don't do Google docs.

What is the internal networks default gateway?

If it is the switch then you need a route from the switch to the VPN IP pool.

Also do your ACL's reflect the inbound and out bound for the VPN Pool?

 

[sigideba]

Hi dspeciale,

I've ran in to this before and the firewall I was checking out didn't have isakmp nat-t enabled. Same symptons and this resolved the issue. The client was able to connect and grab IPs, just not get to anything behind the firewall. Just a shot in the dark...